DOOR LOCK: FRONT DOOR LOCK: INSPECTION (2008 Sequoia)

Last Modified: 11-29-2007		1.6 G
Service Category: Vehicle Interior	Section: Door Lock
Model Year: 2008	Model: Sequoia	Doc ID: RM000002NGE00AX
Title: DOOR LOCK: FRONT DOOR LOCK: INSPECTION (2008 Sequoia)

INSPECTION

1. INSPECT FRONT DOOR LOCK ASSEMBLY LH

(a) Check the door lock motor.

(1) Apply battery voltage to the door lock motor and check operation of the door lock motor.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → Terminal 4 (L)

Battery negative (-) → Terminal 1 (UL)

Lock

Battery positive (+) → Terminal 1 (UL)

Battery negative (-) → Terminal 4 (L)

Unlock

If the result is not as specified, replace the door lock assembly.

(b) Check the door lock position switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Switch Condition	Specified Condition
7 (E) - 8 (LSSR)	Unlock	Below 1 Ω
7 (E) - 8 (LSSR)	Lock	10 kΩ or higher

If the result is not as specified, replace the door lock assembly.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

If the result is not as specified, replace the door lock assembly.

2. INSPECT FRONT DOOR LOCK ASSEMBLY RH

(a) Check the door lock motor.

(1) Apply battery voltage to the door lock motor and check operation of the door lock motor.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → Terminal 4 (L)

Battery negative (-) → Terminal 1 (UL)

Lock

Battery positive (+) → Terminal 1 (UL)

Battery negative (-) → Terminal 4 (L)

Unlock

If the result is not as specified, replace the door lock assembly.

(b) Check the door lock position switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Switch Condition	Specified Condition
7 (LSSR) - 8 (E)	Unlock	Below 1 Ω
7 (LSSR) - 8 (E)	Lock	10 kΩ or higher

If the result is not as specified, replace the door lock assembly.